Over two decades of mooring innovation. Our advanced synthetic rope systems protect vessels from 6m OSVs to 400m FPSOs — across every sea state, in every corner of the world.
From ultra-deepwater mooring to harbour tug lines — our synthetic rope systems outperform steel wire in weight, safety, and service life.
Floating strength. Lighter than steel wire.
| Density | < 1.0 g/cm³ |
| Diameter range | 6mm – 144mm |
| MBL range | 2t – 2,400t |
| UV resistance | High |
| Chemical res. | Excellent |
| Construction | 12-strand / LCII |
Shock absorption perfected.
| Elasticity | High (15–25%) |
| Diameter range | 8mm – 120mm |
| MBL range | 3t – 1,400t |
| Abrasion res. | Excellent |
| Wet strength | 95% retained |
| Construction | 8-strand / double braid |
Cut through anything.
| Cut resistance | Extreme |
| Diameter range | 6mm – 96mm |
| MBL range | 4t – 900t |
| Heat resistance | Up to 500°C |
| Creep | Near-zero |
| Construction | Parallel core / 12-strand |
World-leading deep sea mooring design.
| Core material | HMPE (opt. polyester) |
| Density | 0.97 g/cm³ floating |
| Elongation | 3–4% |
| Abrasion res. | Excellent |
| UV resistance | Excellent |
| Construction | Parallel-strand |
300°C/30 min fire resistance. Buys vital time.
| Core | BlazeGuard™ flame-retardant |
| Construction | Double braided |
| Density | 1.44 g/cm³ |
| vs. Steel wire | 60–70% lighter |
| Fire resistance | 300°C / 30 min |
| Elongation | 3.5–5% |
Stronger than steel. 1/7 of the weight.
| Material | HMPE / Dyneema® |
| Construction | 12-strand |
| Density | 0.97 (floating) |
| Water absorption | 0% |
| Working temp. | Max 70°C |
| Length tolerance | ±1% nominal |
Solaris Marine supplies premium synthetic rope systems to some of the most demanding operators across global offshore, energy, and shipping industries.
Why Leading Operators Choose Solaris Marine
Our rope systems carry simultaneous offshore deep-sea mooring type approval from both ABS and DNV — a standard matched by very few global suppliers.
Full OCIMF MEG4 type approval alongside ISO 9001:2015, and 6 major classification society certifications including Lloyd's Register and Bureau Veritas.
From initial mooring analysis through to bespoke manufacture, inspection, and global logistics — Solaris Marine manages every step of the supply chain.
Enter your vessel parameters and we'll recommend the optimal Solaris Marine product, diameter, MBL, and provide a sizing table for your application.
Enter your vessel details to receive a product recommendation.
Fill in the form and our commercial team will respond within 24 hours with a tailored quotation. No obligation.
Every Solaris Marine product is designed, tested, and manufactured to meet the most rigorous international maritime standards.
From ultra-deepwater platforms to inland port operations — our rope systems are trusted across every demanding maritime application.
HOPEX and TOUGH rope systems for FPSO mooring, riser handling, and anchor-handling operations in water depths up to 3,000m.
DURA polyester spring and breast lines engineered for high-cycle berth mooring at container terminals and bulk cargo facilities.
Solaris TOUGH and HOPEX towlines provide the ultimate safety margin for high-value salvage operations in extreme sea states.
Purpose-built mooring and lifting slings for drydock operations, designed to the specific handling requirements of major shipyards.
Dynamic mooring and anchor deployment ropes for floating wind platforms, rated for 25+ year service life in harsh North Sea conditions.
MIL-SPEC compliant TOUGH aramid mooring, towing, and RAS systems for surface combatants and auxiliaries.
